Robust, compact and reliable.
Motorized card reader & card dispenser
Wherever you want to issue, withdraw and read cards, you need a high-performance card dispenser or card reader. Our motorized card readers and card dispensers are technically mature and have been tried and tested for years. Perhaps you have already stood in front of one of our devices at the parking machine or at self-check-in without realizing it?
We offer various solutions for plastic cards, chip cards and/or contactless RFID and NFC cards. Do not hesitate to contact us, we will be happy to support you in choosing the right motor card reader or card dispenser.
MCR-310: The universal motorized card reader for magnetic stripe, chip & RFID cards
Cost-effective, compact, versatile.
The MCR-310 is a motorized card reader for PVC and PET cards in ISO format. The built-in RS-232 interface and a fully documented interface protocol ensure easy commissioning. The test software with monitor function additionally facilitates software development.
We are happy to advise you!
- ISO 7810ID-1, ISO 7811, ISO 7816-2, ISO14443 A/B
- Operating voltage 12V DC
- RS-232 Interface
- Compact design for space-saving installation
- Card feed & card ejection from front or rear
- Bezel with electric shutter
- Status LED's for communication & power supply
- CE & EMV certified
- 148 x 86 x 48 mm
- Dimensions: 148 mm x 86 mm x 48 mm
- Weight approx. 410 gram
- Suitable for: Smart cards: ISO 7816-2, RFID cards: ISO14443 A/B, Magnetic cards: ISO 7810ID-1, ISO 7811
- Can be used as motor reader and encoder
- Operating voltage 12V DC
- Optical sensors for the detection of the card position
- Also available as a variant with PSAM board
- CE, EMV, RoHS & REACH compliant
The MCR-310 is a compact motorised card reader that can be used in a variety of applications. Typical applications are self-service solutions, car parks and parking machines, access control and payment terminals of all kinds.
The compact design allows space-saving installation. Thanks to the fully documented interface protocol, commissioning of the motor card reader is effortless via the RS-232 interface.
For chip cards and RFID cards in ISO format, the MCR-310 motor card reader functions as a reader and writer, for magnetic stripe cards as a reader. Optical sensors check the card position. The cards can be inserted and ejected from the front or the back. The mouthpiece with electrical shutter effectively prevents foreign objects from entering the card slot.
Thanks to EMV certification, the MCR-310 is also approved for payment transactions in the banking sector.
Do you have any further questions about the MCR-310?
Our service team will be happy to advise you on +49 202 47 95 770 or by email at team@metriax.de.
The following interfaces are possible:
- RS-232
We would be pleased to provide you with the data sheets and further information for the MCR-310 motor card reader.
Please send us a short email for this purpose to team@metriax.de.
We are also happy to offer you the matching contactless cards for the MCR-310 motor card reader.
Click here for a selection of our RFID & NFC cards.
MCR-NU01: With USB and RS-232 interface for magnetic stripe, chip & RFID cards
Light, compact, multifunctional.
The MCR-NU01 is a motorised card reader for PVC and PET cards in ISO format. In addition to the built-in RS-232 interface, the motorised card reader can also be put into operation via a built-in USB interface. A fully documented interface protocol ensures easy commissioning. The test software with monitor function additionally facilitates software development.
We will be happy to advise you!
- ISO 7810 ID-1, ISO 7811, ISO 7816-2, ISO14443 A/B
- Operating voltage 12V DC
- USB & RS-232 Interface
- Compact design for space-saving installation
- Card feed & ejection from front or back
- Bezel with electric shutter
- Status LED's for communication & power supply
- CE & EMV certified
- 166,5 x 96,5 x 54 mm
- Dimensions: 166,5 mm x 95,5 mm x 54 mm
- Weight approx. 410 gram
- Suitable for: Smart cards: ISO 7816-2, RFID cards: ISO14443 A/B, Magnetic cards: ISO 7810ID-1, ISO 7811
- Can be used as motor reader and encoder
- Operating voltage 12V DC
- Optical sensors for the detection of the card position
- Also available as a variant with PSAM board
- CE, EMV, RoHS & REACH compliant
The MCR-NU01 is a compact motorised card reader that can be used in a variety of applications. Typical areas of application are self-service solutions, car parks and parking machines, access control and payment terminals of all kinds.
The compact design allows space-saving installation. Thanks to the fully documented interface protocol, the motor card reader can be easily commissioned via the RS-232 or USB interface.
For chip cards and RFID cards in ISO format, the MCR-NU01 motor card reader functions as a reader and writer, for magnetic stripe cards as a reader. Optical sensors check the card position. Card insertion and ejection can be done from the front or the back. The mouthpiece with electrical shutter effectively prevents foreign objects from entering the card slot.
Due to the EMV certification, the MCR-NU01 is also approved for payment transactions in the banking sector.
Do you have any further questions about the MCR-NU01? Our service team will be happy to advise you on
+49 202 47 95 770 or by e-mail at team@metriax.de.
The following interfaces are possible:
- USB
- RS-232
We would be happy to provide you with the data sheets and further information for the MCR-NU01 motor card reader.
Please send us a short email to team@metriax.de.
We are also happy to offer you the matching contactless cards for the MCR-NU01 motor card reader.
Click here for a selection of our RFID & NFC cards.
MCR-571: The motorised card dispenser for your application
Optionally available with highly perfomanent RFID reader unit.
The MCR-571 is a motorised card dispenser for PVC and PET cards in ISO format. It convinces with its compact design as well as its high robustness and reliability.
The capacity of the card dispenser is 120 cards in the basic version and can be optionally extended up to 500 cards with exchangeable magazines.
A low remaining card level in the card slot can be queried by the control unit via a sensor.
The built-in RS-232 interface and a fully documented interface protocol support easy commissioning. The test software with monitor function additionally facilitates software development.
The preset card thickness can also be changed easily and precisely if required.
Optionally, the MCR-571 is available with an additional high-performance RFID reader unit. This allows all common RFID and NFC cards of ISO 14443 A/B and ISO 18092 (NFC) to be read and encoded, e.g. cards from the MIFARE® series, DESFire®, NTAG® and FeliCa®.
A further variant is available for the combination of chip cards and RFID cards.
We will be happy to advise you on which version best suits your application!
- Optional: ISO 7816, ISO14443 A/B, ISO 18092 (NFC), MIFARE Classic®, MIFARE Ultralight®, MIFARE Plus®, MIFARE® DESFire®, NTAG®, FeliCa®
- Operating voltage 24V DC
- RS-232 Interface
- Capacity 120 to 500 cards
- Card feed from the front
- Status LED's for communication & power supply
- 256 x 99,8 x 165 mm
- Dimensions: 256 mm x 99,8 mm x 165 mm
- Weight approx. 2.5 kg
- Capacity for 120 to optionally 250 or 500 cards
- Container capacity for error cards: max. 20 cards +/- 2 pieces (0.76 mm ISO card)
- Card Pre-Empty Detection for 10-70 cards (0.76 mm ISO cards)
- Optionally suitable as reader and encoder for:
– Chip cards, ISO 7816
– RFID & NFC Cards, ISO 14443 A/B, ISO ISO 18092 (NFC), MIFARE Classic®, MIFARE Ultralight®, MIFARE Plus®, MIFARE® DESFire®, NTAG®, FeliCa® - CE, RoHS & REACH compliant
The MCR-571 is a motorised card dispenser / card collector for PVC and PET plastic cards in ISO format. The compact and solid design ensures that the MCR-571 can be installed in the most space-saving and low-maintenance way possible.
In addition, the MCR-571 card dispenser impresses with its high flexibility and modular adaptability to your application:
In the basic version, the card dispenser has a capacity of 120 cards, which can be increased to 250 or 500 cards via optional stacker extensions.
The card pre-empty detection can be adjusted to a residual quantity of 10-70 cards in the magazine and can be interrogated by the control system via a signal. The card thickness can also be set individually and adapted to the cards you use.
Optionally, the MCR-571 card dispenser / card collector is also available with an additional high-performance RFID reader unit. This allows all common RFID and NFC cards of ISO 14443 A/B and ISO 18092 (NFC) to be read and encoded (frequency 13.56 MHz), e.g. cards from the MIFARE® series, DESFire®, NTAG® and FeliCa®. This turns the pure card dispenser into a multifunctional card dispenser, card reader and card encoder in one device.
If you would like to use contact chip cards in addition to RFID cards, there is another version of the MCR-571 available.
We will be happy to advise you individually on +49 202 47 95 770 or at team@metriax.de!
The following interfaces are possible:
- RS-232
We would be happy to provide you with data sheets and further information on the MCR-571 card dispenser.
Please send us a short email to team@metriax.de.
Two removable stacker with locking function are available for the MCR-571, each with a capacity for 250 or 500 cards (0.76 mm ISO cards).
We are also happy to offer you the matching contactless cards for the MCR-571.
Click here for a selection of our RFID & NFC cards.
Found everything? Our customer service will be happy to help!
We are looking forward to hearing from you!